Metonboss
Flamed COMPASS engraved Titanium scales for Spyderco MANIX 2
Flamed COMPASS engraved Titanium scales for Spyderco MANIX 2
Couldn't load pickup availability
Flamed COMPASS engraved Titanium scales for Spyderco MANIX 2
Redesigned Scales for Spyderco Manix 2 with more comfortable handling and easier opening / closing. Now with Right hand carry, Tip up Clip position with optional Left hand carry (pre-drilled).
COMPATIBILITY: These scales are designed for the standard Manix 2 with the Steel liners and will replace the factory G10 scales only (you will still need the Steel liners for the install). If you want to order these scales for your Manix 2 Lightweight, send me a message and I will refer you to a 3rd party hardware swap kit that converts your Lightweight Manix 2 so you can use my standard scales. The Lightweight Manix 2 models feature a "unibody" plastic handle with two pins on the pocket clip side and two screws on the opposite side to secure the handles together. In contrast, the G10 version predominantly uses metal components and is assembled with screws instead of pins, facilitating easy swapping of custom scales, unlike the Lightweight version.
INSTALLATION: You can use the hardware from the factory knife you purchase separately (*Installation of the scales requires some basic tools and knowledge. You will need a good torx bit set to remove the screws and pivots. The pivot can be tough to remove if you don't know what you are doing. You can search YouTube for more instructions or email me. There are small parts on the Para 2. Disassemble at your own risk as there are no refunds). NOTE: Disassembly of any knife is not covered under the original manufacturer's Warranty.
Titanium metal is a very durable metal because it is corrosion-resistant: sea water, aqua regia, and chlorine. It is 40% lighter than steel but as strong as high-strength steel. Titanium finds applications in things like aerospace and surgical applications. Titanium is a chemical element with the symbol Ti and atomic number 22. It is a lustrous transition metal with a silver color.
Ti WEIGHT: 64gr
FLAMING is not a scientific process; it's done by hand and colors may slightly vary. Your order will be unique. Patterns and colors may slightly vary. I hope you will enjoy my creation.
INSTALL: You can also request the scales to be installed on Factory Knife as a custom order. Just send me a message.
PRECISION: Each MetonBoss item is precision CNC machined from a solid billet in my Anaheim manufacturing facility in California, USA.
EVERY DAY CARRY - LIFETIME WARRANTY
DISASSEMBLY of any knife is not covered under the original manufacturer's Warranty.
We appreciate your support and love for MetonBoss EDC products, including Knife Scales and Hardware, Lanyard beads, Prybars, Flashlights, Pill boxes, Haptic Coins and Fidgets, Worry Coins and Spinning Tops!
Materials
Materials
THE FOLLOWING is a LIST of some of the most popular MATERIALS I machine:
TITANIUM (Ti) is a very durable metal because it is corrosion-resistant: sea water, aqua regia, and chlorine. It is 40% lighter than steel but as strong as high-strength steel. Titanium finds applications in things like aerospace and surgical applications. Titanium is a chemical element with the symbol Ti and atomic number 22. It is a lustrous transition metal with a silver color.
Black ZIRCONIUM: Pure Zirconium (Zr Atomic number 40) is a lustrous, grey-white, very strong, lightweight and hypoallergenic metal that closely resembles hafnium and, to a lesser extent, titanium. Zirconium is extremely resistant to heat and corrosion and it is lighter than steel.
Through my own heating process, I create a unique appearance, that's called "Black Zirconium" or "Oil Slick". Through this high heat, a layer of extremely hard black oxide grows on the metal. This thin black layer is much harder than pure Zirconium, which does not rub off over time. Therefore, it is more durable than black-coated items, such as black tungsten and titanium. This "black" or "Oil Slick" color is permanent, it does not fade, tarnish, or change color.
ZIRCUTI (ZrTi): I use a 5-Alloy ZircuTi (also known as ZrTi or Black Timascus), machined from a solid forged billet: zirconium, 6AL-4V titanium and CP2 titanium layers. What sets it apart from other layered titanium is that zirconium turns black or dark grey when heat is applied; therefore you get beautiful blues, purples, with slivers of black.
MOKUTI (Titanium Damascus, also known as Timascus): Mokuti Damascus is made of layers of 3 or 4 different titanium alloys. These are stacked and forged (in ways that are unique to each rod) into a single solid round rod. I machine this rod to produce a visually dynamic, layered material. The technique is similar to the Mokume-gane style of metalworking from Japan.
SC = SUPERCONDUCTOR: A superconductor (Niobium Ti tiny rods in Copper) is a very rare, hard to get and expensive metal that can conduct electricity or transport electrons from one atom to another with no resistance. Superconductors are used to make extremely powerful electromagnets to accelerate charged particles very fast (to near the speed of light). This is a special metal, a great collector’s item.
METEOR-Ti is a special forged Titanium and only made by two makers in the world. It is a very durable metal because it is corrosion-resistant: sea water, aqua regia, and chlorine. It is 40% lighter than steel but as strong as high-strength steel. Titanium finds applications in things like aerospace and surgical applications. Titanium is a chemical element with the symbol Ti and atomic number 22. It is a lustrous transition metal with a silver color.
COPPER: This pure Copper will develop patina over time. Enjoy the time passing :) Copper is a chemical element with the symbol Cu (atomic number 29). It is a soft. It is an essential nutrient in our daily diet. And, its antimicrobial property is becoming increasingly important to the prevention of infection.
BRASS is an alloy metal that is made of copper and zinc. Due to brass's unique properties, it is one of the most widely used alloys.
AEROSPACE GRADE ALUMINUM: It provides a high strength. It is highly corrosion resistant making it an ideal addition for numerous applications not only in aerospace, but EDC items, such as Knife Scales.
GREEK ASCOLOY: It is a chromium-nickel-tungsten martensitic alloy. It is used for jet engine parts due to its strength and corrosion resistance.
MOKUME-GANE: It is a Japanese metalworking procedure which produces a mixed-metal laminate with distinctive layered patterns "wood grain metal" and it takes on the appearance of natural wood grain. Mokume-gane fuses several layers of differently colored metals together to form a sandwich of alloys called a "billet."
Shipping & Returns
Shipping & Returns
SHIPPING: see more info at https://metonboss.com/pages/shipping
RETURNS / EXCHANGES: see more at https://metonboss.com/pages/exchanges-returns
(copy and paste URL into a new Window)
Care Instructions
Care Instructions
It is recommended to clean it with a standard Window Cleaner such as Windex and a soft Fiber Cloth.
-
PROCESSING TIME:
Our turn around time is about 3-6 business days, unless installation or customization is requested that may take a few days longer. (A very few may take longer as I am a CNC machine shop and my products are not off the shelf mass produced items. Even though most of them are in stock, some are only in machined form, so they still need to be finished to your order specifics - such as color treatment, patterns, etc. - as there are thousands of variations you can select in my shop. If you need any item urgently, please ask me before ordering to be sure.) Thank you, Sean.
-
SPECIAL:
With every $250 purchase or more, you get a Titanium, Zirconium, Greek Ascoloy or Copper surprise gift (up to $80 retail value) (Note: the $250 is for the net amount, not including tax and shipping. One free gift per address.
The following items do NOT QUALIFY: Discounted items, including 2 for 1 offers, Combined items that are already discounted - such as Scales + Clip and items on sale or if paid with a discount coupon. Also do NOT qualify for the free item: any orders with knife installation and custom orders not listed in my store.